Using the appliance for anything other than its intended use can create hazards.
-Do not operate on areas which contain metal objects such as nails and/or screws.
-Never vacuum hot or sharp ob- jects (cigarette butts, ash, nails, etc.).
-Use the appliance only for dry working tasks.
-Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.
-Do not use the appliance on any part of the body of a person or animal.
Service:
-WARNING: There is a risk of fire if the appliance is not clea- ned following these instructions.
-Any misuse or failure to fo- llow the instructions for use renders the guarantee and the manufacturer’s liability null and void.
Instructions for use
Before use:
-Remove the appliance’s protective film.
-Make sure that all the product’s packaging has been removed.
-Prepare the appliance according to the function you wish to use.
Vacuuming function:
-Fit the hose unit to the vacuum cleaner’s air intake.
-To disconnect the hose unit from the vacuum cleaner,
press the two buttons on the hose joint at the same time and pull outwards (Fig. 1).
Insertion of accessories into the appliance’s grip:
-The appliance’s grip is designed in such a way that it allows the insertion of the following accessories: (use the combination that best meets your requirements)
-Extendable extension tube: Designed to provide access to surfaces which are out of reach and make floor cleaning comfortable, its length can be adjusted by using the adjustment control.
-Lid: Specially designed for cleaning floors (both rugs, carpets and hard floors), its base has a retractable brush that can be adjusted to two heights for greater efficiency on these floors.
-Lance: Specially designed for getting into cracks and difficult corners.
-Upholstery brush: Especially suitable for cleaning textile surfaces.
Use:
-Take the length of cable required out of the housing.
-Connect the appliance to the mains.
-Turn the appliance on using the on/off switch.
Once you have finished using the appliance:
-Turn the appliance off, using the on/off switch.
-Unplug the appliance to the mains.
-Retract the cable by pressing the roller cable button and guide the cable into the appliance.
-Clean the appliance
Cord housing
-This appliance has a cable compartment situated on its posterior.
Carry handle/s:
-The device has a handle on the upper part so it can be transported easily and comfortably.
Parking position:
-This appliance has one parking position for comfortable and straightforward storage.
-To use the horizontal parking position, fix the break pad hook to the hook situated on the rear side of the appliance (Fig. 2)
Safety thermal protector:
-The appliance has a safety device, which protects the appliance from overheating.
-If the appliance turns itself off and does not switch itself on again, disconnect it from the mains supply, and wait for approximately 45 minutes before reconnecting. If the machine does not start again seek authorised tech- nical assistance.
Cleaning
-Disconnect the appliance from the mains and let it cool before undertaking any cleaning task.
-Clean the equipment with a damp cloth with a few drops of
Manual F40.indb 14
19/12/12 10:40
