from the appliance it should be situa- ted in a place where the atmospheric temperature is between 12 and 32ºC.
Instructions for use
Before use:
-Make sure that all the product’s packaging has been removed.
-Ensure that the selected tension on the voltage selector coincides with the tension of the mains.
Use:
-Unroll the cable completely before plugging it in.
-Connect the appliance to the mains.
-Use the rotator switch to turn the appliance on and to choose one of three positions – fan and heater position “I” and “II”.
-Use the rotator switch for thermos- tat to choose the comfortable power oh heating (Fig 1).
-During the appliance’s use the
pilot light (D) will come on and off automatically, indicating the heating elements are working, and therefore maintaining the desired temperature.
Fan function:
-Select the fan position.
-Check that the thermostat rotatory switch is set to the maximum.
Heater function:
-Select the heater position.
-Select the desired heating power.
-Check that the thermostat rotatory switch is set to the temperature required
Once you have finished using the appliance:
-Select the minimum position (MIN) using the thermostat rotatory switch control.
-Stop the appliance, selecting posi- tion 0 on the rotator switch control
-Unplug the appliance from the mains.
-Clean the appliance.
Carry handle/s:
-This appliance has a handle on the back to make it easy and convenient to transport (Fig. 2).
Safety thermal protector:
-The appliance has a safety device, which protects the appliance from overheating.
-When the appliance switches itself on and off repeatedly, for reasons other than the thermostat control, check to ensure that there are no obstacles that impede correct air entry or expulsion.
-If the appliance turns itself off and does not switch itself on again, dis- connect it from the mains supply, and wait for approximately 15 minutes before reconnecting. If the machine does not start again seek authorised technical assistance.
Cleaning
-Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
-Clean the electrical equipment and the mains connection with a damp cloth and dry. DO NOT IMMERSE IN WATER OR ANY OTHER LIQUID.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tropicano |
| 2400.indb 14 | 29/06/11 |
| 11:58 | ||||||
|
| ||||||||||
