12 Model 142Operating Procedures
Note: The draw valve is installed c orrectly when the
slotted opening in the draw valve is visible thr ough the
“window” of the freezer door.
Figure 12
Step 8
Install the draw valve handle. Insert the valve lifter
arm through the slotted opening in the draw valve and
align the other end with the cross holes of the f reezer
door. Note: The valve lifter arm may be aligned with
the left or the right cross hole. The dr aw valve handle
will be placed through the opposite cross hole of the
valve lifter arm.
Figure 13
Slide the o- ring into the groove on the draw valve
handle and lubricate with Taylor Lube.
Figure 14
Insert the draw valve handle through the opposite
cross hole and into the opening of the valve lif ter arm.
Note: The draw valve handle can be assembled at
varied vertical positions. Choose an angle which is
comfortable for you, making sure t he draw valve is
completely raised when the draw valve handle is
completely down.
Figure 15