16 Model 142Operating Procedures
Standby
This unit is equipped with a STANDBY feature. If
product is not dispensed for long periods of time (i. e.;
early morning hours), the STANDBY feature will
maintain the hopper and freezing cylinder product at
safe temperatures and prevent product breakdown.
To use the Standby feature, perform the following
steps:
Note: Besu re your hands are clean and sanit ized
before performingthe following steps.
Step 1
Verify that the hopper is adequately filled with m ix and
invert the feed tube.
Figure 29
Step 2
Place the power switch in the AUTO position, and
press the STANDBY button. The button will light,
indicating that the unit is operating as a refriger ator for
product in the hopper and freezing cylinder.
Step 3
To remove the unit from the STANDBY mode, place
the power switch in the AUTO position, and press the
standby button. The light willextinguis h, indicatingt hat
the unit has resumed the normal operating mode.
Step 4
When the unit cycles off, remove the hopper cover,
and place the feed tube in its original position.
Figure 30
Step 5
Replace the hopper cover.
IMPORTANT: The STANDBY mode must
not be used in lieu of daily disassembly, cleaning,
and sanitizing.
Closing Procedure
Todisassemble the f reezer,t he following items will be
needed:
STwo cleaning pails
SSanitized stainless steel rerun can with lid
SNecessary brushes (provided with freezer)
SCleaner
SSingle service towels