14 Model 142Operating Procedures
Figure 20
Figure 21
Step 4
Place the toggle switch in the WASH position. This will
cause the sanitizing solution in the freezing cy linder to
be agitated. Allow to agitate for five minutes.
Step 5
Place an empty pail beneath the door spout and open
the draw valve. Draw off all the sanit izing solution.
When the sanitizer stops flowing from the door spout,
close the draw valve and place the toggle switch in the
OFF position.
Figure 22
Step 6
Remove the feed tube from the hopper. (Be sure your
hands are sanitized.)
Step 7
Place the mix level float on the mix level float stem .
Figure 23