4Model 142To the Operator
131122
Section 2 To the Operator
Your freezer has been carefully engineered and
manufactured to give you dependable operation. I f the
Taylor Model 142 is properly operated and cared for,
it will produce a consistent, quality product. Like all
mechanical products, this machine will require
cleaningand maint enance. A minimum amount of care
is necessary if the operating procedures outlined in
this manual are followed closely.
This Operator’s Manual should be read
before operating or performing any maintenance on
your equipment.
Your Taylorf reezer will NOT eventually compensate
and correct for any errors during the set- up or filling
operations. Thus, the initial assembly and priming
procedures are of extreme importance. It is important
that the personnel responsible for t he equipment’s
operation study this manual in order to be properly
trained.
In the event you should require technical assistance,
please contact your local authorized Taylor Distributor.
Note: YourTaylor warranty is valid only if the parts are
authorized Taylor parts, purchased from the local
authorized Taylor Distributor, and only if all required
service work is provided by an authorized Taylor
service technician. Taylor reserves the right to deny
warranty claims on units or parts if non- Taylor
approved parts or incorrect refrigerant were installed
in the unit, system modifications were performed
beyond factory recommendations, or it is deter mined
that the failure was caused by abuse, misuse, neglect ,
or failure to follow all operating instructions . For full
details of your Taylor Warranty, please see the Limited
Warranty section in this manual.
Note: Constant research results in steady
improvements; therefore, information in this
manual is subjectto changewithout notice.
If the crossed out wheeled bin symbol is
affixed to this product, it signifies that this product is
compliant with the EU Directive as well as other similar
legislation in effect after August 13, 2005. Therefore,
it must be collected separately after its use is
completed, and cannot be disposed as unsort ed
municipal waste. The user is responsible for returning
the product to the appropriate collection facility, as
specified by your local code.
For additional information regarding applicable loc al
laws, please contact the municipal facility and/ or local
distributor.

Compressor Warranty Disclaimer

The refrigeration compressor(s) on this unit are
warranted for the term stated in the Limited Warranty
section in this manual. However, due to the M ontreal
Protocol and the U.S. Clean Air Act Amendments of
1990, many new refrigerants ar e being tested and
developed, thus seeking their way into the service
industry. Some of these new refrigerants are being
advertised as drop- in replacements for numerous
applications. It should be noted that in the event of
ordinary service to this unit’s refrigeration system,
only the refrigerant specifi ed on the affixed data
label should be used. The unauthorized use of
alternate refrigerants will void your Taylor compressor
warranty. It is the unit owner’s responsibility to make
this fact known to any technician he employs.
It should also be noted that Taylordoes not warr antt he
refrigerant used in its equipment. For example, if the
refrigerant is lost during the course of ordinaryservice
to this machine, Taylor has no obligation to either
supply or provide its replacement either at billable or
unbillable terms. Taylor does have the obligation to
recommend a suitable replacement if the original
refrigerant is banned, obsoleted, or no longer available
during the five year warranty of the compressor.
Taylor will continue to monitor the industry and test
new alternates as they are being developed. Shoulda
new alternate prove, through our testing, t hat it would
beac cepted as a drop- in replacement, then the above
disclaimer would become null and void. To find out the
current status of an alternate refrigerant as it relates to
your compressor warranty, call the local Taylor
Distributor or the Taylor Factory. Be prepared to
provide the Model/Serial Number of the unit in
question.