Taylor C713 Manager's Menu

Model C713 Important: To the Operator

The Brush Clean Counter (item 9 on page 13) will

display the number of hours since the freezer was

last brush cleaned. After hour 99, it will change to a

letter and a number (example: A0, A1. . B0, B1, etc.)

Manager's Menu

The Manager's Menu is used to enter the operator

function displays. To access the Menu, touc h the

center of the CONE symbol onthe c ontrol panel.

The arrow symbols, the SEL symbol and the CONE

symbol will be lit when the ACCESS CODE

screen is displayed. (See Figure 12.)

Figure 12

In the Menu program, the arrow symbols and the

SEL symbol will function as menu keys.

UP ARROW - increases the value above the cursor

and is used to scroll upward in text displays.

DOWN ARROW - decreases the value above the

cursor and is used to scroll downward in text

displays.

SEL - advances the cursor position to the right and

is used to select menu options.

Note: The machine will continue operation in the

mode it was in when the menu was selected.

However, the control keys will not be lit and are

non-functional when the Manager's Menu is

displayed.

With the ACCESS CODE screen on the display use

the SEL symbol to set the first code number in t he

cursor position. When the correct number is

selected, touch the SEL symbol to move the cur sor

to the next number position. (See Figure 13.)

ENTER ACCESS CODE

83 0 9

Figure 13

Continue to enter the proper access code numbers

(8309) until all four numbers are displayed, then

touch the SEL symbol. The Manager's menu list will

display on the screen provided the correct access

code is entered.

If an incorrect number is entered for the acces s

code, the display will exit the Menu program when

the SEL symbol is selected. (See Figure 14.)

Figure 14