Teac A200 Sleep, Saver, Support, TOSHIBA, TOSHIBA PC, Components, Hibernation, TOSHIBA Power, Common Driver, TOSHIBA Button, Diagnostic Tool, TOSHIBA Flash Cards

	A200 Features
Hibernation	This feature lets you turn off the power without
	exiting from your software. The contents of main
	memory are saved to the hard disk. When you
	turn on the power again, you can continue
	working right where you left off. Refer to the
	Turning off the power section in Chapter 3,
	Getting Started, for details.
Sleep	In Sleep Mode, power to the system remains on,
	but the processor and all other devices are
	effectively in 'sleep mode'. When the computer is
	in Sleep Mode, the Power LED flashes amber.
	The computer enters Sleep Mode regardless of
	the Hibernate Mode setting. Refer to the Turning
	off the power section in Chapter 3, Getting
	Started, for details.

n Before entering Sleep mode, be sure to save your data.

nDo not install or remove a memory module while the computer is in Sleep mode. The computer or the module could be damaged.

nDo not remove the battery pack while the computer is in Sleep mode. Data in memory will be lost.

TOSHIBA Value Added Package

This section describes the TOSHIBA Component features pre-installed on the computer.

TOSHIBA Power	TOSHIBA Power Saver provides you with the
Saver	features of more various power supply
	managements.
TOSHIBA Button	This utility controls the buttom operation of the
Support	computer. The starting application from the
	buttom can be changed.
TOSHIBA PC	The TOSHIBA PC Diagnostic Tool will display
Diagnostic Tool	basic system configuration information and allow
	the functionality of some of the computer’s built-in
	hardware devices to be tested.

TOSHIBA Flash Cards This utility supports the following functions,

nHot key function

nTOSHIBA utility launcher function

TOSHIBA	TOSHIBA Components Common Driver contains
Components	the module required for the utility which TOSHIBA
Common Driver	offers.

User’s Manual 1-8