Operating Basics

1.Plug one end of the modular cable into the modem jack.

2.Plug the other end of the modular cable into a telephone jack.

Connecting the internal modem

Do not pull on the cable or move the computer while the cable is connected.

If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the Power Options.

Disconnecting

To disconnect the internal modem cable, follow the steps below.

1.Pinch the lever on the connector in the telephone jack and pull out the connector.

2.Disconnect the cable from the computer in the same manner.

LAN

The computer is equipped with networking hardware that supports Ethernet LAN (10 Mbps, 10 BASE-T), Fast Ethernet LAN (100 Mbps,

100 BASE-TX).

Do not install or remove an optional memory module while the Wake-up on LAN feature is enabled.

The Wake-up on LAN feature does not work on battery power, you should always leave the computer connected to the AC adapter if you are using this feature.

User’s Manual

4-8