Teac A200 Battery indicator, Blue, DC IN, Power, Amber, Battery, Battery, Battery, Battery, Battery, Power on, No light, DC IN off, DC IN off, DC IN off

			Power and Power-Up Modes
		Power on	Power off (no operation)
AC adapter	Battery	• Operates
not	capacity is	• LED: Battery off
connected	above low
		DC IN off
	battery trigger
	point
	Battery	• Operates
	capacity is	• Alarm sounds (this
	below low
		function depends on how
	battery trigger
		the computer is
	point
		configured)
		• LED: Battery flashes
		amber
		DC IN off
	Battery	Computer goes into
	capacity	Hibernation or shuts down
	exhausted	(depending on the
		TOSHIBA Power Saver
		setting)
	No battery	• No operation
	installed	• LED: Battery off
		DC IN off

* The LED is dependent on the model you purchased.

Power indicators

As shown in the above table, the Battery, DC IN and Power indicators alert you to the computer's operating capability and battery charge status

Battery indicator

Check the Battery indicator to determine the status of the battery. The following indicator lights indicate the battery status.

Flashing Amber	The battery charge is low. The AC adapter must
	be connected to recharge the battery
Amber	Indicates the AC adapter is connected and is
	charging the battery.
Blue	Indicates the AC adapter is connected and the
	battery is fully charged.
No light	Under any other conditions, the indicator does
	not light.

User’s Manual 6-2