Display (2)

Changing the display (CD/USB mode)

During playback in CD mode or USB mode, each time the DISPLAY button is pressed, the display changes as follows:

Audio CD

Remaining time of current track (min./sec.)

Total elapsed time of the disc (min./sec.)

Total remaining time of the disc (min./sec.)

Currently playing track number

and elapsed time of current track (min./sec.)

MP3 disc/USB

File name

Title

Artist

Album

Currently playing folder and file number, elapsed time of current track (min./sec.), and currently playing file name

<“Title No” (title information unavailable), “Album No” (album information unavailable) or “Artist No” (artist information unavailable) appears when there is no information.

<“  ” appears when the unit cannot read the information.

<The display of this unit can only show single-byte letters and numbers. If a file name uses Japanese, Chinese or other double- byte characters, playback is possible but the name will not be

shown correctly. In such cases, “  ” is displayed.

18

LINE IN PHONO

Basic Operation

Turning the unit on or off

Press the POWER button to turn the unit on or off.

When the unit turns on, the display lights.

Check the POWER ON START switches that determine what the unit does when the power is turned on.

When the power is turned on, and the POWER ON START (OFF-PLAY-REC) switch for the timer is set to PLAY or

REC

or

The source set with the POWER ON START (CD-TAPE- USB) switch starts playback/recording.

The timer recording can only record to cassette tape (pages 45-47).

When the power is turned on, and the POWER ON START (OFF-PLAY-REC) switch for the timer is set to OFF

The source set with the POWER ON START (CD-TAPE- USB) switch becomes the active source.

<When you do not want to use the timer, be sure to set the OFF- PLAY-REC switch to the OFF position to prevent accidentally recording over an important cassette tape.