Teac AD-RW900 Recording on a USB Flash Drive (2)

LINE IN PHONO

Recording on a USB Flash Drive (2)

	(When recording from a tape , LINE IN or PHONO)		Prepare the recording source.
4		5
	Adjust the recording level.
			Recording from CD
	Before recording, adjust the recording level. Failure to do so		To record all the tracks/files on a CD, stop the disc first. To record
	could cause the recorded sound to be distorted or noisy.		only some of the tracks/files on a CD, pause at the beginning of
			the part that you want to record.
	1. Play the source (cassette tape or external source) to be		You can also record tracks in programmed order. For information
	recorded.		about how to set the program, see pages 25-27.

2.Use the REC LEVEL knob to adjust the recording level so that

the loudest sound never lights the “OVER” indicator on the
	Recording from cassette tape
peak level meter.
	To record the entire tape, rewind the tape to its starting point.
	To record from the middle of a tape, stop or pause at the point
	from where you want to start recording.

Select the DOLBY NR (noise reduction) setting (page 10).

	To record from a single tape side, set the REV MODE switch to
	u, and set the playback direction using the Reverse (g) or
	Forward (t) play button. Then press the TAPE Stop (H) button.
	To record from both tape sides, set the REV MODE switch to j,
	and set the playback direction to t. If you set the recording
	direction to g, recording will be of “side B” only.
	Recording from an external source
	Prepare to start playback of the source device.
< Different sources to be recorded have different volumes. In	Example: Set the source selection of an amplifier.
order to record at the optimal volume for each source, it is
	Set the playback media in a connected player.
necessary to adjust the recording level for each source.
	To record from a tuner, tune in a station.

<You cannot adjust the recording level when recording from CD or DIGITAL source.

40