Listening to Files on a USB Flash Drive (MP3/WMA)
CAUTION
Never turn the unit off or disconnect a USB flash drive when it is being accessed, for example, during writing, playback, recording or the erasure of files.
Doing so could damage the
< This section uses MP3 file as an example to explain the operation process; the same process also needs to be followed when WMA file is used.
1 Press the SOURCE button repeatedly to select “USB”.
<When a different source is selected, starting USB playback automatically selects the USB mode.
2 Connect an external USB flash drive to the USB port of this unit.
Reading the USB device takes a few seconds.
<If no MP3 file is on the USB device, “NO MUSIC FILE” is displayed.
3 Press the USB Play/Pause (t/J) button to start playback.
<When playback of all the files has finished, the unit stops automatically.
<MP3 files that are not put in folders are automatically put in the “ROOT” folder. Playback starts from the first file in the ROOT folder.
<See page 50 for information about the playback order of MP3 files.
22
Pausing playback temporarily
Press the USB Play/Pause (t/J) button during playback to stop playback at the current position.
To resume playback, press the USB Play/Pause (t/J) button again.
Stopping playback
Press the USB Stop (H) button to stop playback.
Search for a part of a file
Hold down
During playback, hold down a USB Search (m or ,) button to search for a part of a file. Pressing and holding a Search button increases the search speed.
Release it when you find the beginning of the part that you want to hear.