LINE IN PHONO 
Recording on a CD (3)
Manual track division
It is possible to divide a track into multiple tracks by pressing the RECORD button (KRECORD) while recording.
<Manual track division is possible regardless of the AUTO setting.
<A track cannot be less than 10 seconds in length. The RECORD button (KRECORD) will not work if it is pressed within 10 seconds from the beginning of a track.
34
LINE IN PHONO 
Synchronous recording to CD
The convenient synchronous recording function automatically starts recording when receiving analog or digital signals from an externally connected device such as a CD player and MD deck, and stops recording when signal reception is complete.
For CD, MD, or DAT
Synchronous recording starts when a digital signal is detected, which is the beginning of a track. Synchronous recording stops if there is a period where the sound is quieter than the specified auto track level lasting five seconds.
For digital sources other than the above or analog sources Synchronous recording starts when a sound louder than the specified auto track level is detected. Synchronous recording stops if there is a period where the sound is quieter than the specified auto track level lasting 8 seconds.
1 Complete steps 1 to 5 in “About Recording” to make the settings, and press the CD stop button (H).
<Since the recording level cannot be adjusted when the recording
source is the digital input (
), skip steps 4 and 5
2 Press the SYNC button and select “SYNC 1” or “SYNC ALL”.
Each time you press the sync recording button (SYNC), the sync recording will change.
ALL ONE OFF
Select one of three modes.
ALL
Sync recording of all tracks.
ONE
Sync recording of one track and then recording stops.
OFF
No sync recording.