Listening to a Cassette Tape (2)
Fast-forwarding/Rewinding a tape
Press the Rewind (m) button or the
Winding stops when the end of the tape is reached. To stop winding before the end, press the TAPE stop (H) button.
<You can wind the tape when CD/USB/LINE is selected as a source. These buttons do not, however, function when in a recording mode.
Pitch control
This control varies the pitch of the music during playback.
Turning the PITCH CONTROL knob clockwise increases the playback speed and raises the pitch by a maximum of +10%.
Turning the PITCH CONTROL knob counterclockwise reduces the playback speed and lowers the pitch by a maximum of
<This control does not work during recording.
Tape counter
Press the COUNTER RESET button to reset the tape counter to “0000”. You can use this function to easily locate any desired point on the tape.
30
About Recording
CD-R and CD-RW
A
On a
If you finish recording and finalize the
If you want to record again on a finalized
Serial Copy Management System
This unit is in compliance with the Serial Copy Management System standard. This standard has been established to restrict
Rule 1
A digital recording is possible from a digital source such as a CD, DAT or MD onto a recordable
adigital input connection. However, further
Rule 2
When an analog source such as an analog disc or FM broadcast is digitally recorded by using a