Timer-Controlled Playback and Recording (1)

Connecting a commercially available timer to your audio setup lets you wake up to your favorite music or start recording at specified times.

<The source for timer playback must be CD, TAPE or USB. Timer playback does not work with external devices connected to the LINE inputs.

<The timer recording source can only be an external device connected to the LINE inputs. And the timer recording can only record to cassette tape.

Connections

Referring to the illustration below, connect your audio equipment.

Wall socket

Timer

Audio source

To make a timer-controlled recording of a radio program, set your tuner as required.

Amplifier

Set the input/output selectors and other options to their proper positions.

 

 

Signal flow

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal flow

 

 

during

 

 

 

 

 

 

 

 

 

 

 

 

 

 

during

 

 

recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AD-RW900

Turn off the power of all equipment before making connections.

<Read the instructions of each component you intend to use with this unit.

<Be sure to connect each plug securely. To prevent hum and noise, do not bundle the connection cords.

Timer-Controlled Playback (

)

<The source for timer playback must be CD, TAPE or USB. Timer playback does not work with an external device connected to the LINE input.

1Connect this unit and a stereo system to a commercially available audio timer (see previous page).

Make sure that the outlet that the timer is plugged into is receiving power when it is being used.

2Set the power switch of all components to ON.

3Prepare the source for timer playback.

When you set a cassette tape

e Set the REV MODE switch to the desired position. To make both sides play continuously, set the REV MODE switch to the pposition.

e Set the DOLBY NR switch. (page 10). Playback always starts from “side A”.

4Set the CD-TAPE-USB switch to the desired source for timer playback.

5 Set the OFF-PLAY-REC switch to the PLAY position.

“TIMER” appears on the AD-RW900’s display.

Continued on the next page 

45