Teac AD-RW900 Checking the program order, Deleting tracks/files from the program, Clearing the program, Exiting program mode

Checking the program order

Press repeatedly

When playback is stopped, press the PROGRAM button repeatedly. The numbers of the programmed tracks/files and their program numbers will be shown in order.

Deleting tracks/files from the program

When playback is stopped, press the PROGRAM button repeatedly until the program number of the track to be deleted appears on the display.

Press repeatedly

Example:

Program number to be deleted

Press the CLEAR button.

The track/file is deleted from the program.

Clearing the program

Hold down

more than 1 sec.

When playback is stopped, press the PROGRAM button, followed by the CLEAR button more than 1 second.

The PROGRAM indicator disappears and all the contents of the program are cleared.

<If the PROGRAM indicator is not shown, press the PROGRAM button to activate program mode before pressing the CLEAR button.

<If one of the following buttons is pressed, the contents of the program are also cleared.

In CD mode

POWER, CD OPEN/CLOSE (L), SOURCE

In USB mode

POWER, SOURCE

Exiting program mode

When playback is stopped, press and hold the CD/USB Stop (H) button. The PROGRAM indicator will disappear.

<This does not clear the contents of the program. Press the PROGRAM button again and then press the CD/USB Play/Pause (t/J) button if you want to restart program playback.

27