Teac CD-RW900CD owner manual Playback operations, Discs for playback, Simple playback operations

4−Playback operations

The CD-RW900 can be used to play back CDs (includ- ing CD-R and CD-RW discs that have been recorded and finalized on other types of recorder), as well as CD-R discs and CD-RW discs that have been recorded on the unit.

Audio files in MP3 format on CD-ROM, CD-R and CD- RW are also playable on the unit.

Discs for playback

The CD discs in the CD-RW900 can play back the types of discs listed below.

≠Commercial pre-recorded CDs recorded in CD-DA format.

≠CD-R and CD-RW discs that have been recorded in CD-DA format and finalized properly.

≠MP3 files recorded in ISO9660 level 1 and level 2 format on CD-R and CD-RW discs, and properly finalized. MP3 files recorded in the format which adheres to Joliet, are also playable.

Simple playback operations

1Press the POWER switch to turn on the unit.

2Press the OPEN/CLOSE key to open the disc tray. The display shows Open. Insert a disc in the tray with the label side up.

3Press the OPEN/CLOSE key to close the tray. The display shows Close when a disc is loaded into the unit, then TOC Reading. will appear, with the period flashing.

When the TOC has been read, the display shows the number of tracks and total running time of the disc.

4Press the PLAY key to start playback.

Adjust the connected monitor system, or the level control for the PHONES on the unit to set the listen- ing level you desire.

WARNING

If you monitoring using headphones, adjust the level control to low on the unit, then connect to the PHONES jack before playing back. This will prevent any possible damage for your hearing.

5To stop playback, press the STOP key.

	Disc type		Temporarily stop playback and enter playback
			standby mode, press the READY key. To resume
			playback, press the PLAY key again.
			NOTE
			The explanation in this manual will assume the user is
			starting from the normal Continuous mode.
Total number of tracks		Total running time

The CD-RW900 also shows one of the following:

TOC A disc finalized

MP3 A disc contains MP3 files

Track selection

Using the skip function

Skipping track numbers backward or forward.

1Select desired tracks for playback with the MULTI JOG dial on the front panel. Turning clockwise skips the track number backward and counterclockwise skips forward.

Or, press the SKIP key on the remote control. Pressing ¯ key skips the track number backward and  key skips forward.

2Press the PLAY key to start playback.

Or, press the READY key to cue the track and enter playback standby mode after moving to the head of the selected track. To start playback, press the PLAY key.

TASCAM CD-RW900 15