Teac CD-RW900CD Time display switching, Timer playback, Repeat playback, Random playback

4−Playback operations

Random playback

In this mode, the unit will play back all the tracks on the disc in completely random order, regardless of track number.

1During stop, set the Program or the Mode>Random mode.

2Press the PLAY key and random playback will be- gin.

NOTE

Even when power is turned off, the unit will remain in Random mode.

Time display switching

When the TIME key on the front panel or the remote control is pressed, the time display will switch through several modes on the display.

≠Elapsed track time (no display light indication)

≠Remaining track time (REMAIN is lit in the display)

≠Elapsed disc time (TOTAL is lit in the display)

≠Remaining disc time (TOTAL and REMAIN are lit in the display)

NOTE

≠In program mode, pressing the TIME key displays the elapsed and the remaining time of the whole program.

≠When playing an MP3 disc, elapsed track time is al- ways displayed, and the TIME key cannot be used.

≠For details on time display during recording, please refer to “Time display while recording” in “Recording” section on page 22.

When stopped, the total recording time is shown, re- gardless of the status of the TOTAL and REMAIN indi- cators.

≠Even when power is turned off, the time display mode setting is retained.

Timer playback

By using an external timer, you can set the CD-RW900 to play the loaded disc automatically when the unit is turned on by the timer.

1First, plug the power cord of the CD-RW900 into the power outlet of the timer.

2Load a disc into the unit.

3Switch the TIMER switch on PLAY to enable timer function on for the desired deck.

When Timer playback has been turned on, the timer icon lights up in the display.

NOTE

The indicator flashes when a disc is not loaded into the unit.

4Set the timer to the desired time. Consult the timer’ s operation manual for details. At the set time, the power to the CD-RW900 will be turned on, and playback will automatically begin.

Timer indicator

Repeat playback

1Press the REPEAT key to turn on the repeat mode.

In this mode, all the tracks on the disc are played continuously. The display shows Repeat ON and the indicator lights up REPEAT.

During playback, if the repeat mode is turned on, playback continues as before, and when the last track finishes, playback resumes from the first track.

If the repeat mode is turned on when the deck is stopped, press the PLAY key to begin operation.

2Press the REPEAT key again to turn off the repeat mode. Repeat OFF appears then REPEAT indicator

turns off.

NOTE

≠Combining the repeat mode with the program, Sin- gle-track playback and Random playback functions will enable Program repeat, Single-track repeat and Random repeat operations, respectively.

≠Settings of the repeat playback mode remain after power is turned off, except the specified A-B section (see “A-B repeat playback” on page 19).

18 TASCAM CD-RW900