Teac CD-RW900CD owner manual Track search, Selecting by track number, Normal search, Direct search

4−Playback operations

Selecting by track number

Using the number keys on the remote control, the num- ber of the desired track can be entered directory. Even numbers with two or three digits can be entered easily. For example:

Track 9: press ‘9’ and 009 will be displayed.

Track 12: press ‘1’ and ‘2’ and 012 will be displayed.

Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will be displayed.

After input, press the PLAY key to start playback. Or, the READY key to cue the track at its head position and enter playback standby mode.

You can also enter the track number and start playback by pushing the MULTI JOG dial or using the ENTER key.

NOTE

This function cannot be used in Program or Random mode.

Track search

Normal search

1Press the ∆ / ˚ search key continuously on the front panel, or the SEARCH ∆ / ˚ key on the remote control.

2To stop the search function, simply release the ∆ / ˚ or the SEARCH key.

NOTE

The search function does not operate with MP3 discs.

Direct search

By specifying time from the start of a certain track, you can start playback from a specified point of a specified track.

Basic operation

1During stop, play or playback standby modes, use the number keys on the remote control to input the three-digit track number (such as 002 for track 2), then the desired elapsed time (***min **sec) from the start of that track.

Example: To specify 1 min 30 sec from the start of track 2, input “002 001 30”.

≠The direct search function cannot be used in pro- gram or random mode.

≠For MP3 discs, time cannot be specified within a track. However, if you input the three-digit track number, playback will begin from the start of that track.

Operation variations

Even if the final second is not input, playback will begin from the selected point after pressing the ENTER or PLAY key. Or, if you press the READY key, the unit will enter the playback standby mode at the selected point.

During input, the counter in the display will flash.

Pressing the CLEAR key cancels the input at any stage during input.

NOTE

Regardless of the time display mode (refer to “Time dis- play switching on page 18), the time from the start of the specified track is displayed.

During stop or playback modes, when the final digit is entered, the desired position is automatically lo- cated and playback will begin from the desired point. During playback standby mode, at the desired point the unit will enter playback standby mode.

NOTE

≠If a point which does not exist is entered, setting op- eration will be cancelled.

Specifying a track number only

After inputting the track number, press the ENTER or PLAY key to begin playback of that track, or the READY key to cue the track and enter playback standby mode.

NOTE

Instead of inputting the three-digit track number, you can input only the desired track number.

Example: To specify track 3, input only “3”.

Specifying to the minute

After inputting the three-digit track number and the number of minutes after the start of the track, press the ENTER or PLAY key to begin playback of that track, or the READY key to cue the track and enter playback standby mode.

Example: To specify 1 min 00 sec from the start of track 2, input “002 001”

NOTE

Following the above example, if “0021” is input, the same position will be located.

16 TASCAM CD-RW900