Teac LT-1CD owner manual Clock Adjustment, Press the .m or ,/ button to select 12H or 24H

.m ,/

DISPLAY MEMORY/CLOCK ADJ

1

2

3

4

5

6

7

8

36

Clock Adjustment

1Press the DISPLAY button to select clock display. “:” blinks in the clock display.

<If the unit is off, press and hold the MEMORY/CLOCK ADJ button for 2 or more seconds, and continue the procedure from step 3 .

<Press the STOP button to cancel the time setting. (In the TUNER mode, press the DISPLAY button.)

2Within 4 seconds, press and hold the MEMORY/CLOCK ADJ button for 2 or more seconds.

3Press the .m or ,/ button to select “12H” or “24H”.

If you select “12H”, “AM” or “PM” appears on the display.

<In the TUNER mode, use the TUNING knob.

4Press the MEMORY/CLOCK ADJ button.

5Press the .mor,/ button to set the current hour.

<In the TUNER mode, use the TUNING knob.

6Press the MEMORY/CLOCK ADJ button.

7Press the .mor,/ button to set the current minute.

<In the TUNER mode, use the TUNING knob.

8Press the MEMORY/CLOCK ADJ button to finish the time setting mode.

The clock starts from 00 second.

<If the unit is disconnected from the power supply for more than 3 minutes, the clock and timer setting will be reset.

<If the unit is disconnected for less than 3 minutes the time displayed may not be correct.

ENGLISH