Teac R-1 owner manual Troubleshooting, Specifications, Maintenance

Troubleshooting

In case of any trouble with this unit, please take the time to look through this chart and see if you can solve the problem yourself before you call your Dealer or a TEAC service center.

No power.

e If the batteries are fully discharged, connect the AC adaptor to recharge the batteries.

No sound.

e Turn the unit on and adjust the volume.

The sound is noisy.

e The unit is too close to a TV set or similar electronic appliances. Install the unit further from them, or turn them off. Also try a different electrical outlet or use your R-1 on battery power to see if the noise is coming from your electrical connection.

Cannot listen to any station, or signal is too weak.

e Tune in the station properly.

e Transmitting station is too far away.

e Rotate the unit or antenna for the best reception position.

Maintenance

If the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to remove any fluid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit.

Specifications

Frequency Range (FM):

87.50MHz to 108.00 MHz

Frequency Range (AM):

520 kHz to 1,710 kHz (U.S.A./Canada model) 522 kHz to 1,620 kHz (Europe model)

Speaker Type:

65 mm (2 1/2”)

Impedance:

4ohms

Output Power:

1.5 W

Power Requirement (AC adaptor):

120 V, 60 Hz (U.S.A./Canada model)

230 V, 50 Hz (Europe model)

Power Consumption:

15 W

Dimension (W x H x D):

238 x 127 x 134.5 mm (9 3/8˝ x 5 ˝ x 5 5/16˝)

Weight:

1.4 kg (3 1/16 lbs)

Standard Accessories:

AC Adaptor x 1

FM Lead-type Antenna x 1

Stereo mini plug cable x 1

Owner’s Manual x 1

Warranty Card x 1

<Design and specifications are subject to change without notice.

<Illustrations may differ slightly from production models.

ENGLISH

11