Programmed Playback (1)

2 1 3

4

Up to 20 tracks can be programmed in the desired order.

<Shuffle playback does not work during program playback.

<Insert a disc and select “CD” before beginning programming.

1Press the MEMORY/CLOCK ADJ button in the stop mode.

“MEMORY” indicator blinks, and “P-01” appears on the display.

2Within 10 seconds, press the numeric buttons to select a track.

Example 1:

To select the track No.5:

Example 2:

To select the track No.23:

<If the numeric buttons aren’t pressed within 10 seconds, program mode will be canceled.

3Within 10 seconds, press the MEMORY/CLOCK ADJ button.

The track is programmed, and “P-02” is displayed.

ENGLISH

Repeat steps 2 and 3 to program more tracks.

<You can program up to 20 tracks.

<You can also use the front panel buttons to select a track number. In this case, press the SKIP/SEARCH button to select a track number and then press the MEMORY/CLOCK ADJ button while “MEMORY” is blinking on the display.

<To cancel the program mode, press the STOP button (H).

4When the selection of track numbers is completed, press the PLAY/PAUSE button (y/J) to start program playback.

If the PLAY/PAUSE button (y/J) isn’t pressed within 10 seconds, the MEMORY indicator will go off. In that case, press the MEMORY/CLOCK ADJ button and then press the PLAY/PAUSE button (y/J) to start program playback.

The programmed contents are kept in memory even after the FUNCTION button is pressed or the power is turned off.

15

Page 15
Image 15
Teac SR-L50 owner manual Programmed Playback, Up to 20 tracks can be programmed in the desired order