SETTING A NEW

SECURITY CODE FROM THE

CORDLESS HANDSET

1.Place the cordless handset close to the base unit.

2.On the cordless handset, press and hold the 2 and 8 keys simultaneously for at least 2 seconds. SET SECURITY is displayed.

3.On the base unit, press and hold the MUTE and HOLD buttons simultaneously for at least 2 seconds. The MUTE and HOLD indicators blink and SET SECURITY is displayed again.

If the transmission is successful, the cordless handset will beep in confirmation.

If the transmission is not successful, the transmission will time out after 30 seconds and a 3-beep error tone will sound. (If this happens, move the cordless handset closer to the base unit and try again.)

29

Page 29
Image 29
Technicolor - Thomson 26955 manual Setting a NEW Security Code from Cordless Handset