42pb120S4-en 2/07/04 11:32 Page 13

General operation

Switching the set on and off

To switch the TV set on, put the main power switch located at the rear on the ON position, then press the power button located on the front panel.When the set is on, the light on the front is green.

Standby mode: press the power button on the front panel.When the TV set is in standby mode, the light on the front is orange.

Volume

Volume control: use the buttons on the front panel or the remote control to increase and decrease the volume.

Sound mute: press the button on the remote control to temporarily mute the sound.

To restore it, press the

button again or use the

+/- button.

Displaying status information

In TV mode, press the yellow INFO button on the remote control to display the number and name of the channel you are watching, the zoom format, the type of sound, and the remaining time if the sleep timer is on.

In PIP mode, the PIP display mode is displayed with the number and name of the channel or the AV programme number and the type of signal transmitted.

The number and name of the channel are displayed whenever you turn on the set or change channels.

Accessing TV channels

Using the numeric buttons:

-For channels 1 to 9, press the corresponding button.

-For two-digit channels, first press the 0 button, then the channel number (e.g. type 012 for channel 12), or enter the two digits quickly.

Using the PR+/- buttons: scan through the programmes. AV programmes are not accessible.

Accessing AV programmes

Press the AV button to display the last selected AV programme and scan through the other AV programmes.

EN

13

Page 13
Image 13
Technicolor - Thomson 42PB120S4 manual General operation