Other functions
Sleep timer
3 : 4 5
This function allows you to set an automatic
Press the red button on the remote control to activate the sleep timer function.
A symbol appears on screen in front of the sleep time.
If no timer has been set, then 
buttons to decrease/increase the duration.
EN
17
Once the timer is set, pressing the red button displays the remaining time
before 
buttons to change the setting.
When the timer count down reaches 0, the TV goes automatically into standby and the timer resets to
| PREFERENCES |
|
|
|
| Return |
|
|
|
| Eco mode | |||
| Menu language | English | ||
| Menu brightness |
|
|
|
| AV1 input | Video | ||
| AV2 input | |||
Zoom
The following formats are available using the 
buttons, in TV mode:
4/3: picture in centred 4:3 format.
zoom: picture in centred letterbox 16:9 format.
zoom : picture in 16:9 format with subtitles.
Cinerama: picture in widescreen 4:3 format.
16/9: picture in widescreen 16:9 format.
In PC mode, only 4/3 and 16/9 formats are available.
Customizing your TV set
You can set preferences for some features such as the language or appearance of the menus.
Display the OVERVIEW menu using the MENU button. Select the Preferences option and press OK to confirm.
The corresponding menu appears with the following options:
Eco mode: when this function is enabled,
In video mode: the set goes automatically into standby mode after 10 minutes without video.
In PC mode: the PC power management function will be activated. Check the box using the OK button to enable the functions.
This function is activated by default.
Menu language: select the language you want the menus to be displayed in.The menu is immediately updated according to your selection.
Menu brightness: select a setting using the 
buttons.
AV1 input: use the 
buttons to select the type of video signal transmitted by the equipment connected to the AV1 socket.
The Video option is selected by default.
Note: Select RGB if no picture is displayed when you connect equipment such as a games console.
AV2 input: use the 
buttons to select the type of video signal transmitted by the equipment connected to the AV2 socket.
The Video option is selected by default.
Press EXIT to close the menu. Select Return to return to the OVERVIEW menu.
