Operating Your Receiver
EN
13
Switching on /off
• To switch on the receiver, press ON/ECOon the receiver
once to wake up from standby mode. Press one of the
source buttons or ON/OFF on the remote control to turn on
the receiver.
• When the receiver is on, press ON/OFF on the remote or
ON/ECO on the receiver to return to the standby mode.
Selection of Audio source
When one of the audio source is selected, the audio input
corresponding to the name will be activated.
The receiver acts as a switching device between all the
sources that are plugged into it.
Example 1:
If you connect a MD player to the AUX 1 input on the
receiver and press SOURCE until “AUX 1” shows on the
display. You will be able to have the signal from the MD
player.
PR
AUX 2
VCR
AUX 1
SAT - CABLE
REV FWD
PR
DPL907VD-EN receiver 4/1/04 6:28 PM Page 17