16
Advanced Sound Control

Stereo

The Stereo mode uses the two main channel outputs from
the front speakers and subwoofer channel.
Fine Setting of the Components
The receiver can be directly turned on by pressing the
SOURCE buttons on the remote (like DVD/CD), which also
selects the best surround sound mode. The default surround
modes for different components are as below.
If you want to enjoy multi-channel sound from stereo
sources like CD, you can press SURROUNDrepeatedly to
toggle among the different surround modes and select the
one you want.
For Digital Signal (Dolby Digital)
Dolby Digital Stereo
For DTS Signal
DTS Stereo
For STEREO Signal
Stereo Dolby PL II MOVIE Dolby PL II MUSIC Dolby
PL Stereo

Default Settings

The receiver will keep the last selection in memory as long
as it doesn’t enter standby mode.
DEFAULT INPUT (as seen on display)
Analog
Analog
Built-in
Built-in
SOURCE
AUX 1
AUX 2
TUNER
DVD/CD
Note:
AUX 1 and AUX 2 are just generic names.
You can connect other compatible audio
components to these inputs like TAPE,
MINI DISC, CD-RW player, etc.
DPL907VD-EN receiver 4/1/04 6:28 PM Page 20