Technicolor - Thomson DPL907VD IMPORTANT NOTE

Advanced Sound Control

All the basic settings have already been presetted for the

speakers included in the box.

However, to make the surround sound more effective and

suit the acoustic conditions in your listening room, you may

need to delay the signal coming from some of the speak-

ers. Channel delay compensates for center or surround

speakers that are closer to the listening position than the

front speakers.

You may setup the speakers channel by channel: while in

stop mode, enter the setup menu, then choose SOUND for

speaker setup.

To change the speaker distance

In the DISTANCE menu, press UP/DOWNto select a speaker.

press OK to select the speaker channel which you want to

adjust, then press UP/DOWN to adjust the distance from

the front, rear and center speakers individually.

To test the speaker setting and change the speaker

level

In the TEST TONE menu, a short noise will come from each

speaker respectively, press UP/DOWNto configure the cur-

rently playing speaker.

Advanced Setting

The receiver speaker distance default settings are the

following:

Front speakers (L/R) 4.5 m

Center speaker (Cch) 4.5 m

Rear speaker (SUR) 3 m

IMPORTANT NOTE

• Always use the subwoofer for optimum sound

quality.

0 dB

Front Left Gain Control

DPL907VD-EN receiver 4/1/04 6:28 PM Page 21