Basic adjustment

Buttons for “Manual adjust” operation

Lock

Press R button.

When the service is locked, you must enter your password whenever you tune to the service.

CH skip

Press G button.

Services with a mark are passed over when pressing CHr/son the TV or remote control unit.

Delete

Press Y button.

The selected service is deleted. If you want to watch the service you deleted once again, perform “Auto installation”, “Additional search”, or “Manual search”.

Sort

Press B button.

The item position of services can be sorted.

1Press a/bto select the service whose item position you want to move, and then press ?.

2Press a/bto move it to the desired position, and then press ?.

3Repeat steps 1 and 2 until all desired service items are sorted.

Analogue setting

1Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Channel settings” > “Programme setup”.

2If you have already set the password, enter it here.

• See page 45 for setting a password.

3The “Analogue setting” screen displays, and then press ?.

4Repeat steps 4 and 5 in Digital setting.

NOTE

The “Analogue setting” menu is available only for watching TV in ATV mode.

Additional search

Use this menu to add new services automatically after “Analogue Search” in the “Auto installation” menu has been completed.

Start searching channels after selecting the colour system and sound system.

Manual adjust

You can reconfigure the analogue TV channels settings automatically or manually.

After selecting “Yes” on the screen, press a/b/ c/dto select the channel you want to set and then press ?.

Programme Setup “Manual adjust” menu

Next

You can select one of the following settings.

Search

You can add a new channel within a specified frequency band.

 

Item

Next

Search the next channel.

 

 

Store

Memorise the current display channel.

 

 

Cancel

Return to the previous screen (the search

result will not be stored).

 

 

 

Fine

You can adjust the frequency to the desired position.

1You can set by directly entering the frequency number of the channel with 0–9numeric buttons.

EXAMPLE

179.25 MHz: Press 1 > 7 > 9 > 2 > 5.

49.25 MHz: Press 4 > 9 > 2 > 5 > ?.

NOTE

Adjust while checking the background picture as a reference.

When setting a frequency on the “Fine” screen, the last figure of the frequency needs to be “0” or “5”.

Colour sys.

Select the optimum colour system to receive (“Auto”, “PAL”, “SECAM”, “NTSC3.58”).

Sound sys.

Select the optimum sound systems (broadcasting systems) to receive (“B/G”, “D/K”, “I”, “M”).

NOTE

Check the sound system if the sound output were not correct.

43

Page 45
Image 45
Sharp LED TV operation manual Analogue setting, Buttons for Manual adjust operation