Appendix

Getting information

 

Updating your TV via USB/Network

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

 

 

 

Information

 

 

Picture / Audio test

 

 

 

Software update

 

 

 

 

 

 

 

 

When external equipment is connected with the TV powered on and there is no audio/video output, the TV may determine which equipment could cause a problem between the TV and the external equipment.

Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Picture / Audio test”.

NOTE

Terminals which can be tested:

HDMI, component, composite, SCART, DVI, D-sub

External speakers cannot be tested. This function is available for the TV speakers only.

Item

 

Perform a test for picture display. When

Picture test

external equipment is connected but the

picture is not displayed, the test will be

 

 

performed.

 

 

 

Perform a test for audio playback. When

Audio test

external equipment is connected but the

audio does not playback, the test will be

 

 

performed.

 

 

Information

Message list (DTV only)

When new software is detected, you can confirm the update information and download the software from “Message list”.

Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Message list”.

NOTE

When the TV succeeds at downloading new software, the message is updated in the “Message list” of the “Information” menu.

The software update will not be carried out if there is no new software available at the specified download time.

Information

Receiver report (DTV only)

Display reports regarding failures and changes for timer settings.

Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Receiver report”.

Information

Identification

You can check the TV ID on the screen for reporting to customer service.

Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Identification”.

This function allows you to update to the latest software using a USB device or Network.

1Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software update” > “USB update”.

You can also update the software through the network. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software update” > “Network update” > and follow the on-screen instruction.

A broadband connection and Network setup are required to update the software using the internet (Pages 54 – 56).

2Press ?and then insert the USB device containing the software update file.

CAUTION

• Be sure to insert the USB device correctly into the terminal.

3The TV displays a confirmation screen while checking the data in the inserted USB device.

CAUTION

If the data is not compatible with the system, an error message appears on the screen. Repeat steps 2 and 3 after pressing ?.

When an error message displays, check to see if:

The USB device is inserted firmly.

The USB memory has two or more software update files.

No data for updating the system exists in the USB memory.

The software update file is broken.

The software update file is not compatible with your TV’s software.

The current system is same as the system update data.

The USB memory is not formatted by FAT32.

4The TV displays the software version information after checking the data.

5Press c/dto select “Yes” to update the system, and then press ?.

6The TV restarts automatically, and the software update will be complete.

• This operation may take a while.

NOTE

You cannot update the software using a SD/SDHC memory card containing the update file.

86

Page 88
Image 88
Sharp LED TV Getting information Updating your TV via USB/Network, Picture / Audio test Software update, Identification