Appendix

Reset

If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Reset”.

2If you have already set the password, enter it here.

3Press c/dto select “Yes”, and then press ?.

“Now, TV will restart automatically, OK?” displays on the screen.

Updating your TV via DVB-T (DTV only)

Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available.

View setting

Download setup

4Press c/dto select “Yes”, and then press ?.

“Now initialising...” displays on the screen and blinks.

After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

5Press a/b/c/dto select the desired language listed on the screen, and then press ?.

Press c/dto select “HOME” or “STORE”, and then press ?.

6Setting the country.

Press a/b/c/dto select your country or area, and then press ?.

This setting screen only appears during the initial auto installation.

7The TV searches for and stores all the receivable TV stations according to their settings and the connected antenna.

To abort the initial auto installation in progress, press

C.

NOTE

When the TV is in “STORE” mode, repeat steps 1 to 5 to change to “HOME” mode.

“Reset” is greyed out in 3D mode. To select the “Reset” menu, you need to switch to 2D mode.

Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Standby search” > “Download setup”.

Searching for updates

The TV automatically determines whether a new software version is available when the TV is in standby mode.

 

Item

Yes

Automatically searches for new software

updates available when the TV is in

 

standby mode.

 

 

No

Does not search for update information.

 

 

Now

Lowers image brightness for easier

viewing. Checks if there is new software

 

immediately.

Downloading the software

You can select the method of update.

1If the software is updated, the confirmation message “New download information has been detected.” appears.

If the TV receives the update service while in standby mode, a confirmation message displays after turning on the power.

2Follow the screen prompts.

Item

 

Starts downloading immediately. It takes

 

approximately one hour to update. You

 

cannot carry out other operations while

Yes

downloading.

• Cancels the download by pressing

 

 

?on the remote control unit when

 

“Discontinue” is displayed on the

 

screen during the update.

 

 

No

Starts downloading automatically several

minutes after entering standby mode.

 

 

 

NOTE

Do not unplug the AC cord while receiving the data, otherwise it will not be captured properly.

Updating the software may take some time.

85

Page 87
Image 87
Sharp LED TV operation manual Appendix, Reset, Updating your TV via DVB-T DTV only, Download setup