Other useful features

Time shift playback

Playback recorded scenes of the programme being recorded.

Press dduring recording.

• Press Hto return the scene that is broadcasting.

NOTE

You can also operate from the control panel by pressing

CONTROL.

Time shift playback may take a few moments to start.

Time shift playback will stop and the TV will return to normal broadcasting when a programme is fast-forwarded to a scene that is near to the scene currently being broadcast. The timing at which it returns depends on the speed of fast- forwarding.

Depending on the protection signal specified by a broadcast station, recorded broadcasts can only be played back for a certain period of time or cannot be played back at all (Page 14).

Display information regarding USB- recording

Channel display

Channel information displays by pressing INFO on the remote control unit.

Audio (ENG)

STEREO

Video

 

Subtitle

Off

>>New information

The recording icon shows up when REC Eis pressed and the TV is recording the programme.

The status icon shows up depending on what is shown on the screen.

Counter

The counter displays on the screen with the control panel.

Current playback time

• Hidden during recording

Total playback time of the content

The grey bar shows how much time has progressed.

• Hidden during recording or playback-during-recording

View setting

Auto input selection

You can choose whether or not to switch the input source automatically when receiving an AQUOS LINK compatible signal on the TV during USB-recording operations.

Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “USB-REC setting” > “Auto input selection”.

 

 

Item

Enable

 

Release USB-recording when receiving an

 

AQUOS LINK compatible signal. Switch

 

 

input source automatically.

 

 

 

 

 

 

USB-recording continues to work. The TV

Disable

 

does not switch input source automatically

 

even when receiving an AQUOS LINK

 

 

 

 

compatible signal.

 

 

 

 

 

 

 

 

View setting

 

 

Jump time setting

 

 

 

 

 

You can set the time interval for playback to resume after jumping backwards/forward.

Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “USB-REC setting” > “Jump time setting”.

A time interval from 10 sec. to 99 min. 50 sec can be selected.

NOTE

You can use the time interval you set using the aor b buttons on the control panel.

View setting

Device registration

You need to perform this function to register the USB HDD for the USB-recording.

Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “USB-REC setting” > “Device registration”.

Refer to USB HDD registration (Page 61).

NOTE

Only one USB HDD can be registered for USB-recording. Remove all USB HDDs except the one used for USB- recording.

At least USB HDDs with memory between 100GB and 2TB and under are required for USB-recording to register.

Some USB HDDs, such as ones which have multiple drives, etc., cannot be used for USB-recording.

NOTE

You can also call up the information above by pressing CONTROL on the remote control unit or select “Control (USB-REC)” from “HOME” > “TV Menu” > “Setup” > “Option” > “Option for view”.

64

Page 66
Image 66
Sharp LED TV Other useful features Time shift playback, Auto input selection, Jump time setting, Device registration