Useful viewing functions
Option
Headphone out setting
You can select the headphone/speaker audio output when using the headphones.
Adjusting image position
Option
Position
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone out setting”.
| Item | |
Headphone | Audio output from headphones only. | |
|
| |
Dual | Audio output from headphones and | |
speakers. | ||
| ||
|
|
NOTE
•This function does not work when “Change audio output device” (Page 34) is set to “By AQUOS audio SP” or “Headphone/Audio out select” is set to “Audio out”.
•Regarding the volume adjustment when “Dual” is set:
−Adjust the speaker volume with the Y+/– on the remote control unit.
−Adjust the headphone volume with the Y+/– on the TV.
−The headphone volume is not muted even by pressing e(Mute) on the remote control unit.
•When not using the headphones:
−Audio outputs from the speakers regardless of the settings.
For adjusting a picture’s horizontal and vertical position.
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Position”.
Item
Centres the image by moving it to the left | ||
or right. | ||
| ||
|
| |
Centres the image by moving it up or | ||
down. | ||
| ||
|
|
NOTE
•For resetting all adjustment items to the factory preset values, press a/bto select “Reset”, and then press ?.
•Adjustments are stored separately for each input source.
•Depending on the input signal type, “Wide mode” setting or “Video mode” for the Multimedia mode, a position setting may not be available.
•Images may not be displayed properly depending on the settings and/or signals.
•This function is available for 3D images converted from 2D images or normal 2D images.
Option
Colour system (ATV only)
You can change the colour system to one that is compatible with the image on the screen.
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Colour system”.
NOTE
•The factory preset value is “Auto”.
•If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g., “PAL”, “SECAM”).
Option
Channel selecting effect
Additional features
Option
Illumination
This function makes the LED on the front of TV illuminated in several ways.
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Illumination”.
NOTE
•The LED is illuminated in white for 2D mode.
•The LED is illuminated in blue for 3D mode.
This function shows a screen effect when choosing or changing channels.
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”.
Option
Programme title display (DTV only)
This function allows you to display programme information such as the title and airtime by tuning a channel.
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Programme title display”.
NOTE
• This function is available only when the DTV mode is selected.
50
