Other useful features

How to operate USB-recording

You can enjoy DTV recording or playback by connecting a commercially available USB HDD to the TV.

CAUTION

Do not unplug the AC cord or turn off the MAIN POWER switch during USB-recording timer setting or USB-recording.

When the AC cord is unplugged and the MAIN POWER

switch is turned off:

− The USB-recording timer setting is cancelled.

USB-recording may be automatically stopped when signal reception is poor.

Only this TV can playback the programme recorded on the USB HDD connected to this TV. The programmes cannot playback on other TV or PC.

When a CAM PIN code is required for recording a programme, it is necessary to enter the CAM PIN code in advance (Page 14).

SHARP corporation bears no responsibility regarding compensation for content when recording cannot does not take place, loss of recorded data or other direct or indirect damages related to these matters. Please be forewarned.

EButtons for USB-recording operation

Remote control unit

Control panel

EXT MEDIA

 

TV INFO

SLEEP

Buttons

Description

Displays the list of the programmes recorded by USB-recording.

 

Start recording the programme you are

 

watching.

REC E

• You cannot playback the recorded

programme until approximately three

 

 

seconds after pressing REC Eto start

 

recording.

 

 

REC STOP H

Stop recording.

IPlayback the recorded programme.

HStop the programme in playback and go back to the real time broadcast (live).

Pause the programme in playback (USB-

Frecording continues).

• This function is released in 15 minutes.

SReverse (each time you press this button, the reverse speed changes in three levels).

Fast forward (each time you press this

Jbutton, the fast forward speed changes in three levels).

KJump backward to the previous chapter point*.

LJump forward to the next chapter point*.

Playback will resume after jumping

abackward by the time interval you set in “Jump time setting” (Page 64).

Playback will resume after jumping forward

bby the time interval you set in “Jump time setting” (Page 64).

* Chapter points are fixed at 10 minute increments.

NOTE

Refer to Regarding “Select recording device” (Page 33), when the buttons for USB-recording do not work.

Instead of pressing buttons on the remote control unit, most of the operations shown to the left are also available on the screen with the control panel. You can call up this control panel by pressing CONTROL on the remote control unit or select “Control (USB-REC)” from “HOME” > “TV Menu” > “Setup” > “Option” > “Option for view”.

The “Audio description setting” menu does not work during USB-recording playback.

USB-recording stops if no operation detected for three hours.

When recording operations are not stopped manually, recording will automatically stop after six hours.

To release USB-recording, press REC STOP H, change the DTV channel or change “INPUT”.

Some functions do not work during USB-recording.

USB-recording does not start automatically, but starts only when REC Eis pressed or when a USB-recording timer setting is started.

The PIN is required when you use the buttons such as S, J, K, L, a, b, if you set the PIN and any options for “Parental rating” except “None” are selected.

Do not disconnect the USB-HDD used for USB-recording during USB-recording operation.

62

Page 64
Image 64
Sharp LED TV operation manual Other useful features, How to operate USB-recording, EButtons for USB-recording operation