DTH7500_en 4/07/03 16:55 Page 9
Connections and initial set up
Channel update
If new channels make their way into the audiovisual scene, you will have to update your DMR’s list of channels. In such a case, start a new channel search from the installation menu.This
1.If the main menu is not displayed, press the MENU key.
2.Select the Setup line using the 
and 
keys, and press OK to validate.
3. Select the Installation line using the | and | keys, and press OK to validate. | EN |
4.Select the Channel search line using the 
and 
keys, and press OK to validate.
An installation window will appear. A cursor shows the progress in the
Time set
Your DMR has an automatic time setting system which recognises the time signals put out by certain channels. If your DMR is not set at the right time, you can reset it by following the instructions below:
1.If the Main Menu is not displayed, press the MENU key.
2.Select the Setup line using the 
and 
keys, and press OK to validate.
3.Select the Installation line using the 
and 
keys, and press OK to validate.
4.Select the Manual Clock line using the 
and 
keys, and press OK to validate.
5.Year is highlighted. Enter the year’s 4 digits (press 2, 0, 0, 3 for 2003).
6.Then enter the 4 digits of the date (press 1, 2, 0, 5 for 12th May).
7.Enter the 4 digits of the time
(press 1, 5, 5, 9 for 15:59 (03:59 PM).
8.Press OK to confirm
Sorting the channels
1.If the Main Menu is not displayed, press the MENU key.
2.Select the Setup line using the 
or 
keys, and press OK to validate.
3.Select the Installation line using the 
or 
keys, and press OK to validate.
4.Select the Channel List line using the 
or 
keys, and press OK to validate.
Refer to the Sorting the channels paragraph on page 7 to check or sort out the channels stored on your DMR.
9
