DTH7500_en 4/07/03 16:55 Page 8
Connections and initial set up
Manual channel search
If you want to set up a new channel, use the manual search procedure which will enable you to add a channel to the ones already
1.If the main menu is not displayed, press the MENU key.
2.Select the Setup line using the 
and 
keys, and press OK to validate.
3.Select the Installation line using the 
and
4.Select the Manual Search line using the 
5.Select your country of residence using the 
and press OK.
keys, and press OK to validate.
and 
keys, and press OK to validate.
and 
keys on the remote control,
A
6.Select your country’s TV standard using the 
key.
Note: the standards displayed depend on the country selected in step 5.
FRANCE (LL’) for France,
EURO BG (BGH) for Western Europe.
DKK’ for Eastern Europe.
I for the United Kingdom.
7.Select the Reception line using the 
and 
keys, and use the 
key to choose the type of antenna.
•Reception through external antenna: select Antenna (Ch).
•Cable reception: select Cable (Ca).
8.Select the Channel line using the 
and 
keys.
9.Press PR+ to start the manual search.
The search starts.When a channel is found, the picture appears in the background.The channel number is indicated (e.g.: Ch 06).
If the channel is encoded, press AV to display the pictogram 
next to the channel number. In this case, plug a decoder into the blue AV2 socket of the DMR.
If the picture is poor, select Fine Tuning using 
and 
and adjust with PR+ or
10.When you have got the correct image and sound on the channel, select the line Save with the 
and 
keys, and allocate a channel number with PR+ or PR- or the numbered keys on the remote control. Press OK to store the number that you have assigned to the channel.
The Channel line is once again highlighted to start a new search. Repeat the procedure from step 9 to search for a new channel or press MENU to exit the manual
8
