JVC KD-LX100 SPECIFICATIONS

29

ENGLISH

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front: 45 W per channel

Rear: 45 W per channel

Continuous Power Output (RMS):

Front: 17 W per channel into 4 Ω, 40 Hz

to 20000 Hz at no more than

0.8% total harmonic distortion.

Rear: 17 W per channel into 4 Ω, 40 Hz

to 20000 Hz at no more than

0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz

Frequency Response: 40 Hz to 20000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range:

FM: 87.5 MHz to 107.9 MHz

(with channel interval set to 200 kHz)

87.5 MHz to 108.0 MHz

(with channel interval set to 50 kHz)

AM: 530 kHz to 1 710kHz

(with channel interval set to 10 kHz)

531 kHz to 1602 kHz

(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20000 Hz

Dynamic Range: 96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F)

Dimensions (W × H × D):

Installation Size:

182 mm × 52 mm × 160 mm

(7-3/16" × 2-1/16" × 6-5/16")

Panel Size:

188 mm × 58 mm × 8 mm

(7-7/16" × 2-5/16" × 3/8")

Mass: 1.7 kg (3.8 lbs)

(excluding accessories)

Design and specifications subject to change without

notice.

If a kit is necessary for your car, consult your

telephone directory for the nearest car audio

speciality shop.

EN26-29.KD-LX100[J]f 1/8/01, 10:22 AM29

Contents

Main ESPAOL FRANAIS CD RECEIVER KD-LX100 RECEPTOR CON CD KD-LX100 RECEPTEUR CD KD-LX100 INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL DINSTRUCTIONS IMPORTANT FOR LASER PRODUCTS How to reset your unit CONTENTS LOCATION OF THE BUTTONS Control panel u 45678 9pqwert y How to use the number buttons: Remote controller Preparing the remote controller 1) 2) 3 Installing the battery 1 BASIC OPERATIONS Turn on the power. Select the source. Adjust the volume. Adjust the sound as you want (see page 14). RADIO BASIC OPERATIONS FM1 FM2 FM3 AM FM1 FM2 FM3 AM Storing stations in memory FM station automatic preset: SSM Select the FM band (FM13) you want to store FM stations into. Press and hold both buttons for more than 2 seconds. Press and hold or 4 until M (manual) starts flashing on the display. Tuning into a preset station FM1 FM2 FM3 AM Playing a CD Open the loading slot. Insert a disc into the loading slot. CD OPERATIONS Locating a track or a particular portion on a CD To fast-forward or reverse the track To go to the next tracks or the previous tracks To go to a particular track directly Selecting CD playback modes Playing a CD Text Select text display mode while playing a CD Text. Notes: Disc Title / Performer Track Title Current track no. and Elapsed playing time To play back only intros (Intro Scan) SOUND ADJUSTMENTS Adjusting the sound Select the item you want to adjust. Adjust the level. Using the sound control memory Selecting and storing the sound modes Press MODE. Select the sound mode you want. Turning on/off the BBE function Storing your own sound adjustments To reset to the factory settings OTHER MAIN FUNCTIONS Preferred Setting Mode (PSM) items Press SEL (select) to finish the setting. * To cancel Advanced SCM To set the clock display To select the level meter To select the dimmer mode Note on Auto Dimmer: Controlling the volume automatically (Audio Cruise) Select CRUISE MODE. Select the desired setting. CRUISE 1 CRUISE 2 CRUISE OFF Press SEL (select) to finish the setting. To adjust the volume increase rate If Audio Cruise does not function correctly Assigning names to the sources To erase the input characters Available characters CD CHANGER OPERATIONS To fast-forward or reverse the track To go to the next track or the previous tracks Playing CDs Select the CD automatic changer. To go to a particular disc directly Selecting CD playback modes To play back tracks at random (Random 2 RND1 (Random1) RND2 (Random2) Canceled To play back tracks repeatedly (Repeat Play) 2 To play back only intros (Intro Scan) 2 RPT1 (Repeat1) RPT2 EXTERNAL COMPONENT OPERATIONS Select the external component. Operate the external component. Adjust the volume. Playing an external component TROUBLESHOOTING Symptoms MAINTENANCE CAUTIONS: Handling CDs How to handle CDs To keep CDs clean SPECIFICATIONS AUDIO AMPLIFIER SECTION TUNER SECTION CD PLAYER SECTION GENERAL Call 1-800-252-5722 http://www.jvcservice.com NEDERLANDS FRANAIS ENGLISH CAUTION / ACHTUNG / ATTENTION / LET OP DEUTSCH IMPORTANT KD-LX300 KD-LX100 Installation/Connection Manual Manual de instalacin/conexin Manuel dinstallation/raccordement V FRANAIS Cet appareil est conu pour fonctionner sur des sources de courant continu de 12 V masse NEGATIVE. ELECTRICAL CONNECTIONS CONEXIONES ELECTRICAS RACCORDEMENTS ELECTRIQUES Cet appareil est conu pour fonctionner sur des sources de courant continu de . * Souder les mes desfils pour les raccorder entre eux de faon sre. Amplifier / Amplificador / Amplificateur External component / Componente exterior / Appareil extrieur TROUBLESHOOTING EN CAS DE DIFFICULTES Les fils rouge et noir sont-ils racords correctement? Le fil jaune est-elle raccorde? Le fil de sortie denceinte est-il court-circuit?