ENGLISH
Indication | For: | Preset values | ||
|
| Bass | Treble | BBEII |
SCM BEAT | Rock or disco | +02 | 00 | 2 |
| music |
|
|
|
|
|
|
|
|
SCM SOFT | Quiet | +01 | OFF | |
| background |
|
|
|
| music |
|
|
|
|
|
|
|
|
SCM POP | Light music | +04 | +01 | OFF |
|
|
|
|
|
SCM OFF | (Flat sound) | 00 | 00 | 2 |
|
|
|
|
|
1
2
Press MODE.
The number buttons can work as different function buttons.
Select the sound mode you want.
For details, see page 15.
Recalling the sound modes | 3 1 Select the item you want to adjust | ||
When “SCM LINK” is set to “LINK ON,” | (bass or treble). | ||
2 Adjust the selected item. | |||
select the source. | |||
1 | 2 | ||
| |||
The sound mode stored in memory for the
selected source is recalled.
Repeat steps 3 to adjust the other items.
To adjust the BBEII level, see page 15.
Notes:
•You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” below.
•To adjust the bass and treble reinforcement levels or to turn on/off the BBEII function temporarily, see pages 14 and 15. (Your adjustments will be canceled if another source is selected.)
Storing your own sound adjustments
You can adjust the sound modes (SCM BEAT, SCM SOFT, SCM POP) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
4 Press MODE.
5 Press and hold SCM until the sound mode you have selected flashes on the display.
Your adjustment made for the selected sound mode is stored in memory.
6 Repeat the same procedure to adjust other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on the left column.
16
