Fostex VM200 manual Viewing the Preset Program Change Assign Table, Press the Midi key three times

VM200 & MIDI

Viewing the Preset Program Change Assign Table

The Preset Program Change Assign Table appears on the 3:PGM TABLE2 function page.

Follow these steps to view the Preset assignments:

1.Press the [MIDI] key three times.

The VM200 displays the 3:PGM TABLE2 function page.

2.Select a Program Change number.

Rotate the EQ/LO GAIN rotary control to select a number from 001 through 128.

As you turn the control, the PGM CHG No. parameter changes, and the Assign Table scrolls to reflect the change.

The Scene number assigned to the selected Program Change number will appear next to it in the Assign Table.

Program Change Assign Table Notes

The “Scene Memory to Program Change Assign Table” appears on page 210.

To reset the assignments to their initial settings, press the [SYSTEM] key six times or until it displays the 6:INITIALIZE function page. Turn the EQ/LO GAIN rotary control to set the INIT ITEM parameter to “PGM TBL,” and press the [ENTER] key. For more information, see “Initializing the VM200” on page 197.

You can store the Program Change Assign Table to an external MIDI device, such as a MIDI data filer, using MIDI Bulk Dump. (See “Bulk Dump” on page 179 for more information.)

If a scene is assigned to two or more program changes, the lowest pro- gram change is transmitted when the scene is recalled.

182 VM200 User’s Guide