Fostex VM200 manual Midi In/Out Data Format, Control Change Bn, Program Change Bn

2-1.MOTION CONTROL STATE (MCS

MMC STOP/PLAY/FOR- WARD/REWIND/ RECORD/PAUSE

MIDI In/Out Data

Format

1.CHANGE MESSAGE

1-1.NOTE OFF (8n)

NOTE OFF messages are not received or transmitted.

<Transmission>

Program Change messages are transmitted on the channel set by [TX CH] when you recall a scene assigned in the table selected by [PRO- GRAM CHANGE TABLE] and when [PRO- GRAM CHANGE TX] is set to ON.

If the same scene is assigned to multiple Pro- gram numbers, the smallest Program number will be transmitted.

1-2.NOTE ON (9n)

NOTE ON messages are not received or transmitted.

1-3.CONTROL CHANGE (Bn)

<Reception>

STATUS	1100nnnn	Cn	Program Change
DATA	0nnnnnnn	nn	Program No. (0–127)

2.EXCLUSIVE MESSAGE (F0–F7)

Control Change messages are received only
when [CONTROL CHANGE RX] is set to ON
and the receive channel [RX CH] matches. If	<Transmission>
[RX CH] is set to OMNI, the message is
	Operating the key in the [MMC SEND] page
received regardless of which channel is receiv-
ing.	will transmit these messages.

Control Change messages are “echoed” when [ECHO] is set to ON.

The parameters are controlled based on the settings selected by [CONTROL CHANGE TABLE].

If the messages are received while the [CTL TABLE] setting page is displayed, the cursor automatically moves to the corresponding Control Change number.

<Transmission>

Control Change messages are transmitted on the channel set by [TX CH] when you operate the or item assigned in the table selected by [CONTROL CHANGE TABLE] and when [CONTROL CHANGE TX] is set to ON.

If the same item is assigned to multiple Con- trol numbers, the smallest Control number will be transmitted.

STATUS	1011nnnn	Bn	Control Change
DATA	0cccccccc	cc	Control No. (0–95, 102–119)
	9vvvvvvvv vv		Control Value (0–127)

Use [Dev ID.] to specify the destination.

STATUS	11110000	F0	System Exclusive Message
ID No.	01111111	7F	Real Time System Exclusive
Device ID0ddddddd		dd Destination (00–7E, 7F:all call)
Command	00000110	06	MMC sub-id
	0ccccccc	cc	Command String
			[1]: Stop
			[2]: Play
			[4]: Fast Forward
			[5]: Rewind
			[6]: Record Strobe
			[9]: Pause
EOX	11110111	F7	End Of Exclusive

2-2.MOTION CONTROL PROCESS (MCP) MMC LOCATE (target)

<Transmission>

Operating the key in the [MMC SEND] page will transmit these messages.

Use [Dev ID] to specify the destination.

STATUS 11110000 F0 System Exclusive Message

1-4.PROGRAM CHANGE (Bn)

<Reception>

Program Change messages are received only when [PROGRAM CHANGE RX] is set to ON and the receive channel [RX CH] matches. If [RX CH] is set to OMNI, the message is received regardless of which channel is receiv- ing.

Program Change messages are “echoed” when [ECHO] is set to ON.

A scene is recalled according to the settings selected by [PROGRAM CHANGE TABLE]. If the messages are received while the [PGM TABLE] setting page is displayed, the cursor automatically moves to the corresponding PGM number.

ID No.	01111111	7F	Real Time System Exclusive
Device ID0ddddddd		dd Destination (00–7E, 7F:all call)
Command	00000110	06	MMC sub-id
	01000100	44	Locate
	00000110	06	byte count
	00000001	01	“target” sub command
	0hhhhhhh	hh	hour
	0mmmmmmm	mm	minute
	0ssssss	ss	second
	0fffffff	ff	frame
	0sssssss	ss sub frame (only ‘0’)
EOX	11110111	F7	End Of Exclusive

216 VM200 User’s Guide