Editing the Control Change Assign Table | Fostex VM200 manual

Editing the Control Change Assign Table

Editing the Control Change Assign Table

The VM200 features two Control Change Assign Tables.

The ﬁrst is the User Table, which appears on the 4:CTL TABLE1 function page. You can edit the assignments in this table.

The second table is the Preset Table, which appears on the 5:CTL TABLE2 function page. You can view the assignments in the Preset table, but not edit them.

Follow the steps below to assign a control parameter to a Control Change number.

1.Press the [MIDI] key four times.

The VM200 displays the 4:CTL TABLE1 function page. The following page appears on the display.

2.Select a Control Change number.

Rotate the EQ/LO GAIN rotary control to select a Control Change number from 0 through 95 or 102 through 119. (Numbers 096 through 101 are unavailable).

3.Select the section of the VM200 you wish to control with the Control Change number.

Rotate the EQ/LO-MID GAIN rotary control to select the section you wish to control with the selected Control Change number.

Options include NON, CHANNEL, MASTER, EFFECT, and SCENE ST.

4.Select the sub-section of the VM200 you wish to control. Rotate the EQ/HI-MID GAIN rotary control to select a sub-section.

Options include CH1–20, ST BUSS, REC BUSS, AUX1–4, EFF1–2, MODE, PST/PRE, and AUX PAIR. The available options vary depending on your previous selections.

5.Select a parameter item you wish to control with the selected Control Change number.

Rotate the EQ/HI [GAIN] rotary control to select a parameter item. The available options vary depending on your previous selections.

For more information, refer to the “Control Change To Control Parameters Assignment Tables” on page 211.

VM200 UserÕs Guide

185

Image 185

Fostex VM200 manual Editing the Control Change Assign Table, Press the Midi key four times, Select a Control Change number

Contents

VM200 Safety Instructions VM200 Getting Started Monitoring Signals Scene Memory Initializing the VM200 VM200 User’s Guide About This Chapter VM200 Welcome to the VM200 Using this Guide Installing the VM200 Inputs and Outputs Feature SummaryAudio Speciﬁcations Midi functions Mixer Functions Mixer Conﬁguration Why a Digital Mixer? Dual On-board Effects Processors Four-band Parametric EQ & EQ LibraryDigital I/O About the Display and Graphic User Interface Scene Memory Faders Touring VM200 Top Panel Control Surface 2TRK in switch PAD 26dB switchesAnalog Control Section Input selectors LCD Display Enter and Exit Keys Data Wheel and Neighboring Keys+1/ Keys Function Keys Midi Key Setup SectionSystem Key Current Scene Status Key Mode SectionROUTING/PHASE Key CH View Key PAIR/GROUP Key CHANNEL/METER Key AUX1, AUX2, AUX3, and AUX4 Keys Fader Mode SectionEFF1 and EFF2 Keys Channel Key EQ on Key EQ LibraryRecall Key Store Key Effect Library Eff Edit Section Rec Buss Section Solo Key Scene Memory Section Channel Control Section Fader function On key function ON, SOLO, & EQ Edit KeysOn Keys Solo key function Solo Keys EQ Edit key function EQ Edit KeysEQ Section Rotary Controls Select Keys 2TRK Rear Panel +48 Phantom Power Inputs 1 4 XLR or Phone Connectors a or BInputs 5 8 Phone Connectors Inserts 1-4 Phone Connectors 75Ω On, Off Switch Power Switch Block Diagram VM200 User’s Guide Started Phones VM200 System Example Turning the VM200 On and Off Connecting the Power Cord Channel Layers Few Tips on Using the VM200 Analog Stopless Rotary Controls Keeping It DigitalAn Important Note About Word Clock Information Channel Edit Function Lower and Raise Faders to Initiate SendsReading the Display Function Page Parameter Matrix Examples of Other Function Pages Lit & Flashing LED Keys Lit & Flashing LED Keys Connect the ST Buss OUT to the analog inputs of a recorder Finally...Let’s Get StartedMaking Connections Lower all faders and Gain and Trim knobs on the VM200 Powering OnAdjusting the Channel Input Press the channel 1 EQ Edit key Adjusting the EQ Adjusting the EQ Press the Recall key in the Eff Library section Audition Some EffectsPress the EFF2 key in the Eff Edit section Recording Press the EFF2 key in the Fader Mode sectionStoring a Mix Scene Press the 17-20 EFF RTN Page Select key VM200 User’s Guide Channels Input Channels Phantom Power for Input Channels Insert Channels Trim Controls Pad Switches Input channels Press the Exit key or the CHANNEL/METER key Inverting the Input Phase Input Channel EQ Setting Channel LevelsMuting Channels Panning Input Channels Routing Input Channels Feeding Outputs Monitoring and Soloing Input ChannelsREC Buss Out ST Buss Out Grouping Mute Channels Pairing ChannelsDigital Outs Press the PAIR/GROUP key to display the 1CH Pair function Grouping Faders Press the CH View key to display the 1CH View function Viewing Input Channel Settings Press the EQ Edit key for the target channel Copying Channel Settings Press the Enter key to execute the copy operation VM200 User’s Guide Chapter Contents Equalizers EQ Adjusting the EQ Press the EQ on key in the Selected EQ section to turn it on Lo-Mid Hi-Mid Gain G Bypassing the EQ EQ Enabling ChannelsPress the Enter key to conﬁrm your selection Press the EQ on key in the Selected EQ section While pressing and holding down the Enter key, press Resetting the EQ VM200 User’s Guide Name EQ Preset Library List Press the Enter key to recall the desired EQ Program Recalling EQ Programs Recalling EQ Programs Press the Enter key Storing EQ Programs Storing EQ Programs Editing EQ Program Titles EQ Library Name Edit function pages Copying EQ Settings Copying EQ Settings EQ Preset Library Parameters Name Parameter Description Lo-Mid Hi-Mid Gain Distortion of popular Description Lo-Mid Hi-Mid Gain VM200 User’s Guide Monitoring Signals MON SEL Parameter Solo Mode ParameterMonitoring and Soloing Two Track Input 2TRK Monitor Outs and Phones Monitoring Press the Setup System key Soloing Solo KEY Parameter Options Latch Selected Solo keys light up Solo Safe Function Press the Setup System key four times from start of cycle Press the CHANNEL/METER key or the Exit key in most modes Metering Signal LevelsViewing Input/Output Level Meters Press the CH View key LED Display Meter L/R or ST BUSS/SOLO Outputs Chapter Contents Overview Adat OUT & S/P DIF OUT Viewing the ST Buss OUT Meters Using the ST Buss OUTMonitoring the ST Buss OUT Muting the ST Buss OUT Setting the ST Buss OUT LevelSoloing the ST Buss OUT Viewing the REC Buss OUT Meters Using the REC Buss OUTMonitoring the REC Buss OUT Soloing the REC Buss OUT Setting the REC Buss OUT Level 114 VM200 UserÕs Guide Enabling AUX Sends 3 & 4 ADD. AUX Parameter Using the AUX Sends Monitoring AUX Sends Viewing the AUX Send and Master Setting Pre-fader/Post-fader AUX Sends Sending Channel Signals to AUX Sends Use the Master on button to turn the AUX Send on and off Muting AUX Sends Press the Exit key to return to Channel Edit mode Pairing AUX Sends Smoothing Function Press the Enter key to conﬁrm the setting Viewing Buss Routing for Each Channel 122 Effects VM200 Effects Reverb effects Effect Preset Library ListEffects Library Modulation effects DelaysEarly Reﬂection-type Reverbs Multi-effects Pitch Changer Applying Effects Setting Effects ReturnSelecting an Effects Processor Press the CHANNEL/METER key Routing Effects Returns Sending Signal to Effects Processor Pre-fader/Post-fader Effect Sends Controlling the Sends SignalsViewing and Adjusting the Effect Send Level Raise the fader for the corresponding channel Viewing and Adjusting the Effect Send Master Level Setting the Effect Return Level Controlling the Return SignalsMuting Effect Sends Monitoring Effects Sends Editing Effects Recalling Effects Programs Press the Store key in the Eff Library section Storing Effects Programs EFF Library Name Edit function pages Press the Enter key to recall the desired Effect program Editing Effect Program Titles 138 Early Reﬂection-type Effects Effects ParametersReverb-type Effects Monodelay 3CHDELAY Dualdelay 3DCHORUS Chorus Monopitch CHORUS-REVERB Delay-Reverb-type Effects REVERB-CHORUS REVERB-FLANGE Memory What is Scene Memory? What Can You Store in a Scene? Scene Edit Indicator AUX Preset Scene Memory Recalling a Scene Automatically at Start-up Recalling Mix ScenesRecalling a Scene Manually Assign Program Change messages to scene memories Recalling Mix Scenes Using Midi Program Change MessagesPress the System key ﬁve times Motorized Faders Press the Scene Memory Store key Storing Mix Scenes When you’ve ﬁnished naming the scene, press the Enter key Recall Safe Function Editing Scene Memory TitlesSpecifying Recall Safe Channels Press the System key three times Specifying Recall Safe Parameters Press the CHANNEL/METER key to return to Channel Edit mode 158 Connections Digital Connections, Word Clocks, and Sample Rates 161 Word IN/OUT Connectors Word Clock SetupSetting the Master Word Clock Press the System key Recording to a Digital Multitrack Recorder or DAT Setting the VM200 as Master or Slave VM200 is word clock Slave Multitrack Recording and Mastering to a DAT Digital I/Os Using Adat Assigning Channels to Adat Direct SENDs Using Adat OUT 167 Using S/P DIF OUT Press the ROUTING/PHASE key twice Using S/P DIFAssigning S/P DIF Signals to Channels Press the CHANNEL/METER key or Exit key Cascading the VM200 172 VM200 Midi Ports Using the VM200 with Midi Cascading Two VM200s Connecting Midi devices RX CH Receive Channel Midi Transmit and Receive ChannelsTX CH Transmit Channel Program Change TX Program Change MessagesProgram Change RX Program Change Table Control Change TX Control Change MessagesControl Change RX Control Change Table Bulk Dump System Exclusive Messages Fostex ExclusiveSystem Exclusive TX & RX System Exclusive DevID Set the TX CH and/or RX CH parameters to on Using Program Change Messages to Recall ScenesPress the Midi key Press the Midi key twice Editing the User Program Change Assign TableSelect a Program Change number Select a Scene number Program Change Assign Table Notes Viewing the Preset Program Change Assign TablePress the Midi key three times Examples Using Program Change Messages Using Control Change Messages Select a Control Change number Editing the Control Change Assign TablePress the Midi key four times Control Change Assign Table Notes Viewing the Preset Control Change Assign TablePress the Midi key ﬁve times Examples Using Control Change Messages Controlling Parameters Using Fostex Exclusive Messages Automatic transmission in response to Bulk Dump Request Bulk DumpTransmitting Midi Bulk Dump Messages Specifying the data you want to transfer Manual transmission of Bulk Dump Messages Receiving Bulk Dump Requests Receiving Bulk Dump Requests Entering MMC Send Mode Setting the Device ID NumberMMC Midi Machine Control Send Select an ID number for the DevID parameter 193 Press the CHANNEL/METER key or the Exit key Frame ModeMMC Send and Timecode Checking the Locate Points Transmitting the Locate CommandsStoring Locate Points 196 Initializing the VM200 Initializing the VM200 199 System Parameters Value Default Setup Parameters Chapter C ontents Data Display Warning Messages EQ 1-8 Invalid! EQ Enable Outputs SpeciﬁcationsInputs Midi IN/OUT/THRU General Maintenance Maintenance Channel Fader Gain Table Tables & Data Master Fader Gain Left Right Pan Pan Gain Range 20.3Hz 20.2kHz 240 steps per 1/24 octave EQ Frequency Program Change Assign User Program Change AssignTable 2 PresetProgram Change To Scene Memory Assignment Tables Control Change Assign User Control Change To Control Parameters Assignment Tables Control Change Assign Preset P0 InitMix Preset Scene Parameters P1 Recording P2 MixDown Control Change Bn Midi In/Out Data FormatMotion Control Process MCP MMC Locate target Program Change Bn Fostex Exclusive Message Command List Remote Command Setup Commands Command Details Channel/Buss Commands 221 Effects Commands Bulk Dump Request Bulk Dump & Request Midi Device Inquiry Message Model VM200 Version1.0 Midi Implementation Chart Fostex Distributors List In Europe Declaration of EC DirectiveAffect of Immunity on This Equipment 227 228 Index 230 VM200 User’s Guide VM200 User’s Guide 231 Symbols Numerics Page Fostex Corporation