Fostex VM200 , Copying EQ Settings

EQ
90 VM200 User’s Guide
Copying EQ Settings
You can use the EQ Copy function to copy EQ settings from one
channel to another.
The EQ COPY function page features a 1-by-20 matrix that enables you
to select one source channel EQ, and enable or disable the other
channels as copy destinations.
The selected source channel EQ is marked by an “S.” A highlighted
indicator marks the channels targeted as copy destinations. A dark
indicator means the channel is not selected (disabled) as a copy des-
tination.
1.
Press the
[CH VIEW]
key twice (from start of cycle).
The VM200 displays the 3:EQ COPY function page.
The
[CH VIEW]
key and the
[EQ EDIT]
keys for all channels flash. The
selected Page Select key lights up; unselected Page Select keys flash.
2.
Press the appropriate Page Select key to select the desired
channel layer.
The selected Page Select key lights up; unselected Page Select keys
continue to flash.
3.
Press the
[EQ EDIT]
key for the EQ copy source channel.
You can select only one source channel EQ to copy at a time.
The selected [EQ EDIT] key lights up. The EQ COPY function page
marks the source channel with an “S” and prompts you to select a
destination channel.