Fostex VM200 manual Bulk Dump & Request, Bulk Dump Request

MIDI In/Out Data Format

4.Bulk Dump (& Request)

<Reception>

Bulk Dump is received when [BLK DMP EQ.] is set to ON and when [RX CH] and DEVICE No. match.

The received Bulk Dump is immediately written into the specified memory.

When the VM200 receives the Bulk Dump Request, it immediately transmits Bulk Dump.

<Transmission>

Bulk Dump is transmitted on the channel specified by [TX CH] when you operate the key in the [BULK DUMP] page.

In response to Bulk Dump Request, Bulk Dump is sent on the channel specified by [RX CH].

4-1.Bulk Dump Request

<< Setup Bulk Dump Request >>

f0 51 <DevId> 2B ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 01 <Item> f7

<Item> 01:System, 02:Midi, 03:Locate, 127:All Setup

<< Scene Memory Bulk Dump Request >>

f0 51 <DevId> 2B ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 02 <MemNo> f7

<MemNo> 0: Edit Buffer, 1 – 100: UserMemory, 127: All User Memory

<< Eff Library Bulk Dump Request >>

f0 51 <DevId> 2B ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 03 <LibNo> f7

<LibNo> 50 – 99: User Library, 127: All User Library

<< Eq Library Bulk Dump Request >>

f0 51 <DevId> 2B ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 04 <LibNo> f7

<LibNo> 50 – 99: User Library, 127: All User Library

<< PGM Table Bulk Dump Request >>

f0 51 <DevId> 2B ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 05 00 f7

<< CTL Table Bulk Dump Request >>

f0 51 <DevId> 2B ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 06 00 f7

4-2.BULK DUMP OUT FORMAT

<< Setup Bulk Dump Format >>

f0 51 <DevId> 3B <Byte Count L> <Byte Count H> ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 01 <Item> <Data> --- <Data> <Check Sum> f7

<< Scene Memory Bulk Dump Format >>

f0 51 <DevId> 3B <Byte Count L> <Byte Count H> ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 02 <MemNo>> <Data> --- <Data> <Check Sum> f7

<MemNo> 0: Edit Buffer, 1 – 100: UserMemory

<< Eff Library Bulk Dump Format >>

f0 51 <DevId> 3B <Byte Count L> <Byte Count H> ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 03 <LibNo>> <Data> --- <Data> <Check Sum> f7

<LibNo> 50 – 99: User Library

<< Eq Library Bulk Dump Format >>

f0 51 <DevId> 3B <Byte Count L> <Byte Count H> ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 04 <LibNo>> <Data> --- <Data> <Check Sum> f7

<LibNo> 50 – 99: User Library

<< PGM Table Bulk Dump Format >>

f0 51 <DevId> 3B <Byte Count L> <Byte Count H> ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 05 00 <Data> --- <Data> <Check Sum> f7

<< CTL Table Bulk Dump Format >>

f0 51 <DevId> 3B <Byte Count L> <Byte Count H> ’V’ ’M’ ’2’ ’0’ ’0’ ’A’ 06 00 <Data> --- <Data> <Check Sum> f7

*“Byte Count” is the number of bytes counted from the byte following <Byte Count> up to the byte before <Check Sum>.

*“Check Sum” covers after <Byte Count> before <Check Sum>, with all EOR being removed.

VM200 User’s Guide 223