Fostex manual Initializing the VM200

Initializing the VM200

Initializing the VM200

You can initialize the VM200 to its factory default settings by using the Initialization function.

You can specify the items you wish to initialize, choosing from the fol- lowing options:

❑ALL (all parameters)

❑SCENE MEM. (Scene Memory)

❑EQ LIBRARY

❑EFF LIBRARY

❑PGM C. TABLE (Program Change Table)

❑CTRL C. TABLE (Control Change Table)

❑SETUP

Note: If you want to reset only the mix settings and retain other param- eter settings, recall one of the preset scene memories P0, P1, or P2 instead. See the chapter entitled “Scene Memory” on page 147 for more information.

Follow the steps below to initialize the VM200.

1.Press the [SYSTEM] key repeatedly to display the 6: INITIALIZE function page.

2.Rotate the EQ/LO Gain control to select the desired item. Select from the following options:

•ALL (all parameters)

•SCENE MEM. (Scene Memory)

•EQ LIBRARY

•EFF LIBRARY

•PGM C. TABLE (Program Change Table)

•CTRL C. TABLE (Control Change Table)

•SETUP

The selected item flashes.

198 VM200 User’s Guide