Fostex VM200 manual Copying Channel Settings

Input Channels

Copying Channel Settings

You can use the Channel Copy function to copy input channel set- tings from one channel to another.

The CHANNEL COPY function page features a 1-by-20 matrix that enables you to select one source channel, and enable or disable the other channels as copy destinations.

The selected source channel is marked by an “S.” A highlighted indi- cator marks the channels targeted as copy destinations. A dark indi- cator means the channel is not selected (disabled) as a copy destination.

1.Press the [CH VIEW] key twice (from start of cycle) to display the 2:CH COPY function page.

The [CH VIEW] key and the [EQ EDIT] keys for all channels flash. The selected Page Select key lights up; the unselected Page Select keys flash.

2.Press the appropriate Page Select key to select the desired channel layer.

The selected Page Select key lights up; unselected Page Select keys continue to flash.

3.Press the [EQ EDIT] key for the copy source channel. You can select only one source channel to copy at a time.

The selected [EQ EDIT] key lights up. The CHANNEL COPY function page marks the source channel with an “S” and prompts you to select a destination channel.

4.Press the appropriate Page Select key to specify the channel layer, then press the [EQ EDIT] key of the copy destination channel(s).

You can select multiple channels as destinations.

72 VM200 User’s Guide