Fostex VM200 manual Using the AUX Sends, Enabling AUX Sends 3 & 4 ADD. AUX Parameter

Using the AUX Sends

Using the AUX Sends

The VM200 features four auxiliary (AUX) sends, which enable you to send a signals to various destinations. You can send signals from input channels 1 through 20 to AUX Sends 1 through 4. You can use the four AUX Sends individually or in stereo pairs.

REC BUSS OUT AUX SEND

R 4 L 3

ADD.AUX SEND

2

AUX Sends 1–4

1

You can configure each channel AUX Send as a pre-fader or post-fader send.

AUX Sends 1 through 4 signals are routed to the AUX SEND 1 through 4 jacks respectively. (AUX 3 & 4 are available only if you turn on the ADD.AUX parameter, as described below.)

The VM200 also features a Smoothing function that reduces CPU load to achieve smoother fader adjustment.

The VM200 does not include dedicated AUX return inputs. Use the insert channels to return AUX signals. For more information, see “Insert Channels 1–4” on page 62.

Enabling AUX Sends 3 & 4 (ADD. AUX Parameter)

If you wish to use AUX Sends 3 & 4, you must turn on the ADD. AUX parameter on the CURRENT SCENE STATUS function page.

1.Press the [CURRENT SCENE STATUS] key.

The VM200 displays the CURRENT SCENE STATUS function page.

ADD.AUX parameter

2.Rotate the EQ/LO-MID Gain control to turn on the ADD.AUX parameter.

The ON indicator in the ADD. AUX parameter field flashes.

3.Press the [ENTER] key to confirm the change.

4.Press the [EXIT] key to display the CHANNEL EDIT function page.

Note: When the ADD.AUX parameter is turned on, the REC BUSS OUT jacks function as AUX Sends 3 and 4, and the REC BUSS OUT routing is disabled.

VM200 User’s Guide 115