Fostex VM200 Input Channel EQ, Muting Channels, Setting Channel Levels, Panning Input Channels

Input Channel EQ

Input Channel EQ

You can apply EQ to channels 1—16 using the four-band parametric equalizer. For more information on using the equalizer, see “EQ” on page 75.

Muting Channels

To mute a channel, use the Page Select keys to select the desired channel layer, then make sure the channel’s [ON] key is turned off.

If channels are linked as a stereo pair (see “Pairing Channels” on page 68) you can use either channel’s [ON] key to turn the pair off (or on).

You can also group input channels into Mute groups and control them as one, using a single [ON] key. (See “Grouping Mute Channels” on page 68.)

Setting Channel Levels

You control input channel levels using the faders.

If it is not already selected, select the desired channel layer using a Page Select key, then press the channel’s [ON] key.

The VM200 features seven Fader Modes. The faders control different functions and parameters depending on the current Fader Mode.

You can select a Fader Mode by pressing one of the keys in the Fader Mode section, such as [AUX1], [EFF2], [CHANNEL], etc. (See “Faders” on page 32 for more information about Fader Modes.)

If channels are linked as a stereo pair or group, you can set the chan- nel level for the pair or group using any fader in the pair or group. For more information, see “Pairing Channels” on page 68.

Panning Input Channels

Use the eight panpot rotary controls to pan the signal between the left and right channels of the stereo output.

1.Make sure that the [CHANNEL/METER] key is lit. If not, press it to turn it on.

VM200 User’s Guide 65