Fostex VM200 manual Setup Section, System Key, Midi Key

Setup Section

Setup Section

The Setup section features two function keys: [SYSTEM] and [MIDI]. The SYSTEM key displays function pages that enable you to configure the VM200.

The [MIDI] key displays function pages that enable you to interface the VM200 to MIDI devices.

SETUP

SYSTEMMIDI

[SYSTEM] Key

The [SYSTEM] key enables you to configure the VM200.

It displays a sequence of six function pages on the LCD Display if you repeatedly press the key.

SYSTEM Key

Function Pages	Includes parameters that enable you to...
1:CLOCK/MON	Select a system clock, specify the buss to monitor, select a
	solo mode and key operation, turn the fader motors on or
	off, and set the Frame mode.
2:RCL SAFE	Specify parameters that you want to remain unmodified
	(not updated) when you recall a scene from memory.
3:CH RCL SAFE	Specify channels that you want to remain unmodified (not
	updated) when you recall a scene from memory.
4:SOLO SAFE	Specify channels that you want to send to the ST Buss in
	M-Solo mode.
5:POWER ON RCL	Specify which scene the mixer should recall from memory
	when you power on the VM200.
6:INITIALIZE	Re-initialize the VM200, resetting all parameters to factory
	default settings.

[MIDI] Key

The [MIDI] key enables you to interface the VM200 with MIDI (Musical Instrument Digital Interface) instruments and devices.

The [MIDI] key also features six function pages, as summarized below:

MIDI Key

Function Pages	Includes parameters that enable you to...
1:MIDI TX&RX	Set MIDI transmit/receive channels, set MIDI message trans-
	mission and reception on or off.
2:PGM TABLE1	Edit User Program Change Assign table 1.
3:PGM TABLE2	View Program Change Assign table 2.
4:CTL TABLE1	Edit User Control Change Assign table 1.
5:CTL TABLE2	View Control Change Assign table 2.
6:BULK DUMP	Set up Bulk Dump transmission.

VM200 User’s Guide 23