Fostex VM200 manual Adat OUT & S/P DIF OUT

ADAT OUT & S/P DIF OUT

Note: If the ADD. AUX parameter is turned on, the REC BUSS is disabled. Fore more information, see “Enabling AUX Sends 3 & 4 (ADD. AUX Parameter)” on page 115.

ADAT OUT & S/P DIF OUT

You can output digital stereo signals from the ADAT OUT and S/P DIF OUT connectors.

You can connect any ADAT-compatible recording device to the ADAT OUT optical connector, including a Fostex VR800 recorder, Alesis® ADAT, Alesis ADAT-XT, or other digital multitrack recorders.

The S/P DIF OUT uses an optical connector. You can use this to route the stereo signal to any S/P DIF format audio device, such as a com- puter soundcard or DAT recorder.

For more information, see “Digital Connections” on page 159.

	S/P DIF		ADAT
IN	OUT	IN	OUT

ADAT and S/P DIF connections

AUX SEND

You can assign a signal to AUX Sends 1 through 4. (AUX Sends 3 & 4 are available only when the ADD. AUX parameter is turned on. For more information, see “Enabling AUX Sends 3 & 4 (ADD. AUX Parameter)” on page 115.)

The AUX Sends provide additional outputs that you can use for a vari- ety of purposes. For example, you can route a signal out the AUX SENDS to an external DAT recorder, talkback system, or other appli- cation.

You can configure channel AUX Sends as pre-fader or post-fader sends.

For more information, see “Using the AUX Sends” on page 115.

REC BUSS OUT

R 4 L 3

ADD.AUX SEND

AUX SEND

AUX Sends 1–4

2 1

VM200 User’s Guide 109